GSM Device and Network Error Codes

-

GSM Device and Network Error Codes

  ERROR's (GSM Device related codes)
  ERROR: 0 Phone failure
  ERROR: 1 No connection to phone
  ERROR: 2 Phone adapter link reserved
  ERROR: 3 Operation not allowed
  ERROR: 4 Operation not supported
  ERROR: 5 PH_SIM PIN required
  ERROR: 6 PH_FSIM PIN required
  ERROR: 7 PH_FSIM PUK required
  ERROR: 10 SIM not inserted
  ERROR: 11 SIM PIN required
  ERROR: 12 SIM PUK required
  ERROR: 13 SIM failure
  ERROR: 14 SIM busy
  ERROR: 15 SIM wrong
  ERROR: 16 Incorrect password
  ERROR: 17 SIM PIN2 required
  ERROR: 18 SIM PUK2 required
  ERROR: 20 Memory full
  ERROR: 21 Invalid index
  ERROR: 22 Not found
  ERROR: 23 Memory failure
  ERROR: 24 Text string too long
  ERROR: 25 Invalid characters in text string
  ERROR: 26 Dial string too long
  ERROR: 27 Invalid characters in dial string
  ERROR: 30 No network service
  ERROR: 31 Network timeout
  ERROR: 32 Network not allowed, emergency calls only
  ERROR: 40 Network personalization PIN required
  ERROR: 41 Network personalization PUK required
  ERROR: 42 Network subset personalization PIN required
  ERROR: 43 Network subset personalization PUK required
  ERROR: 44 Service provider personalization PIN required
  ERROR: 45 Service provider personalization PUK required
  ERROR: 46 Corporate personalization PIN required
  ERROR: 47 Corporate personalization PUK required
  ERROR: 48 PH-SIM PUK required
  ERROR: 100 Unknown error
  ERROR: 103 Illegal MS
  ERROR: 106 Illegal ME
  ERROR: 107 GPRS services not allowed
  ERROR: 111 PLMN not allowed
  ERROR: 112 Location area not allowed
  ERROR: 113 Roaming not allowed in this location area
  ERROR: 126 Operation temporary not allowed
  ERROR: 132 Service operation not supported
  ERROR: 133 Requested service option not subscribed
  ERROR: 134 Service option temporary out of order
  ERROR: 148 Unspecified GPRS error
  ERROR: 149 PDP authentication failure
  ERROR: 150 Invalid mobile class
  ERROR: 256 Operation temporarily not allowed
  ERROR: 257 Call barred
  ERROR: 258 Phone is busy
  ERROR: 259 User abort
  ERROR: 260 Invalid dial string
  ERROR: 261 SS not executed
  ERROR: 262 SIM Blocked
  ERROR: 263 Invalid block
  ERROR: 772 SIM powered down
 ERROR's (GSM Network related codes)
   ERROR: 1 Unassigned number
   ERROR: 8 Operator determined barring
   ERROR: 10 Call bared
   ERROR: 21 Short message transfer rejected
   ERROR: 27 Destination out of service
   ERROR: 28 Unindentified subscriber
   ERROR: 29 Facility rejected
   ERROR: 30 Unknown subscriber
   ERROR: 38 Network out of order
   ERROR: 41 Temporary failure
   ERROR: 42 Congestion
   ERROR: 47 Recources unavailable
   ERROR: 50 Requested facility not subscribed
   ERROR: 69 Requested facility not implemented
   ERROR: 81 Invalid short message transfer reference value
   ERROR: 95 Invalid message unspecified
   ERROR: 96 Invalid mandatory information
   ERROR: 97 Message type non existent or not implemented
   ERROR: 98 Message not compatible with short message protocol
   ERROR: 99 Information element non-existent or not implemente
   ERROR: 111 Protocol error, unspecified
   ERROR: 127 Internetworking , unspecified
   ERROR: 128 Telematic internetworking not supported
   ERROR: 129 Short message type 0 not supported
   ERROR: 130 Cannot replace short message
   ERROR: 143 Unspecified TP-PID error
   ERROR: 144 Data code scheme not supported
   ERROR: 145 Message class not supported
   ERROR: 159 Unspecified TP-DCS error
   ERROR: 160 Command cannot be actioned
   ERROR: 161 Command unsupported
   ERROR: 175 Unspecified TP-Command error
   ERROR: 176 TPDU not supported
   ERROR: 192 SC busy
   ERROR: 193 No SC subscription
   ERROR: 194 SC System failure
   ERROR: 195 Invalid SME address
   ERROR: 196 Destination SME barred
   ERROR: 197 SM Rejected-Duplicate SM
   ERROR: 198 TP-VPF not supported
   ERROR: 199 TP-VP not supported
   ERROR: 208 D0 SIM SMS Storage full
   ERROR: 209 No SMS Storage capability in SIM
   ERROR: 210 Error in MS
   ERROR: 211 Memory capacity exceeded
   ERROR: 212 Sim application toolkit busy
   ERROR: 213 SIM data download error
   ERROR: 255 Unspecified error cause
   ERROR: 300 ME Failure
   ERROR: 301 SMS service of ME reserved
   ERROR: 302 Operation not allowed
   ERROR: 303 Operation not supported
   ERROR: 304 Invalid PDU mode parameter
   ERROR: 305 Invalid Text mode parameter
   ERROR: 310 SIM not inserted
   ERROR: 311 SIM PIN required
   ERROR: 312 PH-SIM PIN required
   ERROR: 313 SIM failure
   ERROR: 314 SIM busy
   ERROR: 315 SIM wrong
   ERROR: 316 SIM PUK required
   ERROR: 317 SIM PIN2 required
   ERROR: 318 SIM PUK2 required
   ERROR: 320 Memory failure
   ERROR: 321 Invalid memory index
   ERROR: 322 Memory full
   ERROR: 330 SMSC address unknown
   ERROR: 331 No network service
   ERROR: 332 Network timeout
   ERROR: 340 No +CNMA expected
   ERROR: 500 Unknown error
   ERROR: 512 User abort
   ERROR: 513 Unable to store
   ERROR: 514 Invalid Status
   ERROR: 515 Device busy or Invalid Character in string
   ERROR: 516 Invalid length
   ERROR: 517 Invalid character in PDU
   ERROR: 518 Invalid parameter
   ERROR: 519 Invalid length or character
   ERROR: 520 Invalid character in text
   ERROR: 521 Timer expired
   ERROR: 522 Operation temporary not allowed
   ERROR: 532 SIM not ready
   ERROR: 534 Cell Broadcast error unknown
   ERROR: 535 Protocol stack busy
   ERROR: 538 Invalid parameter

Comments

Post a Comment

Popular posts from this blog

MAP Protocol Error codes and Supplementary Service codes

-
MAP Protocol Error codes and Supple Service codes  MAP Protocol Error Codes  Generic errors     34 System failure     35 Data Missing     36 Unexpected Data Value     21 Facility Not Supported     28 Incompatible Terminal     51 Resource Limitation  Identification and Numbering Errors     01 Unknown Subscriber     144 Number Changed     03 Unknown MSC     05 Unidentified Subscriber     07 Unknown Equipment  Subscription Errors     08 Roaming Not Allowed     09 Illegal Subscriber     12 Illegal Equipment     10 Bearer Service Not Provisioned     11 Teleservice Not Provision...
Read more

LTE attach Procedure

-
In this series of Log Analysis, we are explaining about the LTE attach procedure, below is the detailed summary : Step Direction Channel Message 1 UE <---- NW BCCH -> BCH , No MAC Header , RLC TM, No PDCP MIB [0xB0C1] LTE MIB Message Log Packet Version = 2 Physical cell ID = 378 FREQ = 1276 SFN = 320 Number of TX Antennas = 2 DL Bandwidth = 5 MHz (25) Step Direction Channel Message 2 UE <---- NW BCCH -> DL SCH , No MAC Header , RLC TM, No PDCP SIBs 0xB0C0  LTE RRC OTA Packet  --  BCCH_DL_SCH / System   Information value BCCH-DL-SCH-Message :: { message c1 : systemInformation :       { criticalExtensions systemInformation-r8 :           { sib-TypeAndInfo             {   sib2 :        ...
Read more

Cause Codes From Network

-
C AUSE CODES   FROM   NETWORK   Reference : 3GPP TS 24.008 10.5.3.6 and Annex G. Cause  No  1  :    “unassigned (unallocated) number” (UMTS specific cause values for call control) This cause indicates that the destination requested by the mobile station cannot be   reached  because, although the number is in a valid format, it is not currently assigned (allocated). Cause value = 2  : IMSI unknown in HLR (Causes related to MS identification) This cause is sent to the MS if the MS is not known (registered) in the HLR. This cause code  does not affect operation of the GPRS service, although is may be used by a GMM procedure. Cause value = 3  :   Illegal MS (Causes related to MS identification)   This cause is sent to the MS when the network refuses service to the MS either because an  identity of the MS is not acceptable to the network or because the MS does not pass the authenticat...
Read more

MCC-MNC Codes for India

-
S. No. MCC-MNC OPERATOR Circle 1 INA 00 404-00 SISTEMA SHYAM Rajasthan 2 INA 01 404-01 Vodafone Haryana 3 INA 02 404-02 Airtel Punjab 4 INA 03 404-03 Airtel Himachal Pradesh 5 INA 04 404-04 Idea Delhi 6 INA 05 404-05 Vodafone Gujarat 7 INA 07 404-07 Idea Andhra Pradesh 8 INA 09 404-09 Reliance Telecom Assam 9 INA 10 404-10 Airtel Delhi 10 INA 11 404-11 Vodafone Delhi 11 INA 12 404-12 Idea Haryana 12 INA 13 404-13 Vodafone Andhra Pradesh 13 INA 14 404-14 SPICE Punjab 14 INA 15 404-15 Vodafone Uttar Pradesh (East) 15 INA 16 404-16 Airtel North East 16 INA 17 404-17 Aircel West Bengal 17 INA 18 404-18 Reliance Telecom Himachal Pradesh 18 INA 19 404-19 IDEA Kerala 19 INA 20 404-20 Vodafone Mumbai 20 INA 21 404-21 LOOP Mumbai 21 INA 22 404-22 IDEA Maharashtra 22 INA 24 404-24 IDEA Gujarat 23 INA 25 404-25 Aircel Bihar 24 INA 27 404-27 Vodafone Maharashtra 25 INA 28 404-28 Aircel Orissa 26 INA 29 404-29 Aircel Assam 27 INA 30 404-30 Vodafone Kolkata 28 INA 31...
Read more

WCDMA Attach Procedure

-
WCDMA Attach Procedure WCDMA initial attach to the network, step by step messages from Network <=> MS 1. [0x412F/004/007] OTA LOG  BCCH-BCH DL/Complete SIB List [0x412F] WCDMA Signaling Messages Channel Type = DL_BCCH_BCH , Radio Bearer ID = 40, Uarfcn = 10807, Psc = 404, Message Length = 31 Interpreted PDU: value BCCH-BCH-Message ::= { message { sfn-Prime 106, payload completeSIB-List : { sib-Type systemInformationBlockType1, sib-Data-variable '11100110 00110011 11100001 00001000 010 ...'B } 2. [0x412F/254/001] OTA LOG BCCH-BCH DL/System Information Block Type 1 [0x412F] WCDMA Signaling Messages Channel Type = Complete SIB (254)  , Radio Bearer ID = 40, Uarfcn = N/A, Psc = N/A, Message Length = 20 Interpreted PDU: value SysInfoType1 ::= { cn-CommonGSM-MAP-NAS-SysInfo '8CF8'H, cn-DomainSysInfoList { { cn-DomainIdentity cs-domain, cn-Type gsm-MAP : '0A01'H, cn-DRX-CycleLengthCoeff 6 }, ...
Read more

GSM Attach Procedure

-
GSM Attach Procedure GSM initial attach to the network, step by step messages from Network <=> MS 1. [0x5B2F/002/129] | OTA LOG | 07:21:52.178 | GSM DSDS RR Signaling Message Channel Type = RACH (2) Direction = Uplink Message Type = Open Loop CMD ACK (129) Message Length in bytes = 24 L3 Message in Hex:   17 49 06 1B 3E 46 04 F4 94 00 2A C8 00 0A 14 65 4A B8 00 00 81 00 05 9B Decoded Message: prot_disc = 7 (0x7) (GSM_EPS_MOB_MANAGEMENT) msg_type = 73 (0x49) 2.0 0x5B2F/002/129] | OTA LOG | 07:21:52.178 | GSM DSDS RR Signaling Message Channel Type = BCCH (1) Direction = Uplink Message Type = System Information Type 9 (4) Message Length in bytes = 19 L3 Message in Hex:   12 06 15 AB EB 7E 00 00 00 00 00 00 00 00 00 00 00 00 00 Decoded Message: prot_disc = 6 (0x6) (GSM_RR_MANAGEMENT) msg_type = 21 (0x15) MEASUREMENT_REPORT BA_USED = 1 (0x1) DTX_USED = 0 (0x0) RXLEV_FULL_SERVING_CELL = 43 (0x2b) 3G_BA_USED = 1 (0x1) ME...
Read more

LTE IMS MO Call

-
LTE IMS MO Call 0x1832  IMS Registration Version = 1 Registration Type = Initial Call Id Length = 59 Call Id = 3512047382_2335928920@2405:204:6c09:13b:ed63:680a:633:8ab7 Request Uri Length = 38 Request Uri = sip:ims.mnc861.mcc405.3gppnetwork.org To Length = 56 To = <sip:405861002372445@ims.mnc861.mcc405.3gppnetwork.org> Result = OK 0x156E  IMS SIP Message  --  IMS_SIP_REGISTER/INFORMAL_RESPONSE Version = 1 Direction = UE_TO_NETWORK SDP Presence = 0 SIP Call ID Length = 59 SIP Message Length = 2506 SIP Message Logged Bytes = 2507 Message ID = IMS_SIP_REGISTER Response Code = INFORMAL_RESPONSE (0) CM Call ID = 255 SIP Call ID = 3512047382_2335928920@2405:204:6c09:13b:ed63:680a:633:8ab7 Sip Message = REGISTER  sip:ims.mnc861.mcc405.3gppnetwork.org SIP/2.0 0x156E   IMS SIP Message  --  IMS_SIP_REGISTER/OK Version = 1 Direction = NETWORK_TO_UE SDP Presence = 0 SIP Call ID Length = 59 ...
Read more

SIP Response Codes

-
List of SIP response codes The Session Initiation Protocol (SIP) is a signalling protocol used for controlling communication sessions such as Voice over IP telephone calls. SIP is based around request/response transactions, in a similar manner to the Hypertext Transfer Protocol (HTTP). Each transaction consists of a SIP request (which will be one of several request methods), and at least one response. Contents 11xx—Provisional Responses 22xx—Successful Responses 33xx—Redirection Responses 44xx—Client Failure Responses 55xx—Server Failure Responses 66xx—Global Failure Responses 1xx—Provisional Responses 100 Trying Extended search being performed may take a significant time so a forking proxy must send a 100 Trying response. 180 Ringing Destination user agent received INVITE, and is alerting user of call. 181 Call is Being Forwarded Servers can optionally send this response to indicate a call is being forwarded. 182 Queued Indicates that the destination was temporarily unavai...
Read more